NABL Accredited Electronics Testing in Noida

EDTC Noida is accredited by NABL in accordance with ISO/IEC 17025:2017 — 249 accredited tests across 4 disciplines, recognised under the ILAC-MRA.

ilac-MRA and NABL accreditation symbols with certificate number NABLT0826UP19145 — EDTC is a NABL accredited testing laboratory under ISO/IEC 17025:2017
Accredited in the field of Testing

Certificate of Accreditation

The National Accreditation Board for Testing and Calibration Laboratories has assessed and accredited EDTC Noida in accordance with ISO/IEC 17025:2017, “General Requirements for the Competence of Testing & Calibration Laboratories”. NABL is a signatory to the ILAC Mutual Recognition Arrangement (ILAC-MRA).

Certificate number
NABLT0826UP19145
Accreditation standard
ISO/IEC 17025:2017
Validity
Accredited tests
249 tests, 4 disciplines
Name of legal entity
India Cellular & Electronics Association
Accredited facility
Ground Floor & 2nd Floor, C-DAC, B-30, Sector-62, Industrial Area, Noida, Uttar Pradesh, India
NABL Certificate of Accreditation NABLT0826UP19145 issued to Electronics Design and Testing Centre (EDTC), Noida (A Division of India Cellular & Electronics Association (ICEA)), accredited in accordance with ISO/IEC 17025:2017 in the field of Testing, valid 20 August 2026 to 19 August 2030.

NABL Certificate of Accreditation — click to open the PDF

NABL Accredited Electronics Testing Services

Our accredited scope spans 249 tests across 4 disciplines, grouped exactly as they appear in the NABL annexure.

134
accredited tests

Electrical & Domestic Electrical Appliances

Safety testing for household and similar electrical appliances as per the applicable IS 302 series.

  • IS 302 series
Products tested
  • Appliances for Heating Liquids
  • Clocks
  • Domestic Electric Food-Mixers, Liquidizes and Grinders
  • Electric Irons
  • Household and Similar Electrical Appliances
  • Induction Stove
  • Room Heaters
  • Toasters, Grills, Roasters and Similar Appliances
31
accredited tests

Electrical & Environmental Testing

Environmental testing for electrical and electronic products, including temperature, humidity, damp heat, dry heat, corrosion/salt fog, thermal cycling and other relevant tests as per applicable standards.

  • IS/IEC 60068
  • IS 9000
  • MIL-STD-810H
  • JSS 55555
  • QM-333
23
accredited tests

Audio, Video & Similar Electronic Apparatus

Testing against applicable requirements of IS 616 / IEC 60065 for audio, video and similar electronic apparatus.

  • IS 616
  • IEC 60065
61
accredited tests

Electronics — IT Equipment

Safety testing for information technology and audio/video ICT equipment, across two accredited product groups:

  • Electronics & IT Equipment

    24

    Testing against applicable requirements of IS 13252 / IEC 60950-1 for information technology equipment.

    • IS 13252
    • IEC 60950-1
  • Audio/Video, Information & Communication Technology Equipment

    37

    Safety testing under IS/IEC 62368-1, covering applicable electrical, thermal, mechanical, fire and safeguard-related requirements.

    • IS/IEC 62368-1
Products tested
  • Audio/Video, Information and Communication Technology Equipment
  • Information Technology Equipment
  • Information Technology Equipment (Household and Home/Office Document/Media Shredders)

Every one of these tests is listed individually in the searchable scope below.

Not in our accredited scope? We also offer pre-compliance testing and EMI/EMC evaluation, and product design and prototyping.

What accreditation means for your product

Accreditation is not a badge on a wall. It changes what our reports are worth to you and how quickly your product reaches the market.

Test reports that carry weight

Reports issued under our accredited scope are backed by a formal, third-party assessment of our technical competence — recognised by regulators, certification bodies and customers alike.

International recognition

NABL is a signatory to the ILAC Mutual Recognition Arrangement (ILAC-MRA), so accredited results are recognised across participating economies worldwide — easing entry into export markets.

Fewer surprises at certification

Testing to the same methods a certification body will apply means issues surface here, on your schedule, rather than during a formal submission when a failure costs weeks.

Design and testing under one roof

Because our design team sits alongside the accredited lab, a failure does not become a hand-off. Findings go straight back into the design and get retested quickly.

Our single-window vision

  1. Product Concept
  2. Design & Development
  3. Testing
  4. Compliance
  5. Certification
  6. Market Readiness

A single-window platform for product development, testing, compliance and certification — enabling manufacturers, OEMs, ODMs, startups and technology companies to move from concept to market readiness without changing partners.

Search our full scope of accreditation

Every one of our accredited tests, exactly as listed in the NABL annexure. Search by test or standard — or filter by discipline.

Showing 249 of 249 accredited tests

S.NoTest / parameterTest method standard
1Abnormal OperationAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 19)
2ClassificationAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 6)
3Clearances, Creepage Distances and Solid InsulationsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3)
4HeatingAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 11)
5Internal WiringAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10)
6Leakage Current and Electric StrengthAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 16)
7Leakage Current and Electric Strength at Operating TemperatureAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 13)
8Marking and InstructionsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 7)
9Moisture ResistanceAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 15)
10Power Input and CurrentAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 10)
11Protection Against Access to Live PartsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 8)
12Provision for EarthingAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 27)
13Resistance to RustingAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 31)
14Screws and ConnectionsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 28)
15Stability and Mechanical HazardsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 20)
16Terminals for External ConductorsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 26)
17Verification of ComponentsAppliances for Heating LiquidsIS 302 (Part 2 / Section 15, Clause 24)
18Abnormal OperationClocksIS 302 (Part 2 / Section 26, Clause 19)
19ClassificationClocksIS 302 (Part 2 / Section 26, Clause 6)
20Clearances, Creepage Distances and Solid InsulationClocksIS 302 (Part 2 / Section 26, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3)
21HeatingClocksIS 302 (Part 2 / Section 26, Clause 11)
22Internal WiringClocksIS 302 (Part 2 / Section 26, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10)
23Leakage Current and Electric StrengthClocksIS 302 (Part 2 / Section 26, Clause 16)
24Leakage Current and Electric Strength at Operating TemperatureClocksIS 302 (Part 2 / Section 26, Clause 13)
25Marking and InstructionsClocksIS 302 (Part 2 / Section 26, Clause 7)
26Moisture ResistanceClocksIS 302 (Part 2 / Section 26, Clause 15)
27Power Input and CurrentClocksIS 302 (Part 2 / Section 26, Clause 10)
28Protection Against Access to Live PartsClocksIS 302 (Part 2 / Section 26, Clause 8)
29Provision for EarthingClocksIS 302 (Part 2 / Section 26, Clause 27)
30Resistance to RustingClocksIS 302 (Part 2 / Section 26, Clause 31)
31Screws and ConnectionsClocksIS 302 (Part 2 / Section 26, Clause 28)
32Stability and Mechanical HazardsClocksIS 302 (Part 2 / Section 26, Clause 20)
33Terminals for External ConductorsClocksIS 302 (Part 2 / Section 26, Clause 26)
34Verification of ComponentClocksIS 302 (Part 2 / Section 26, Clause 24)
35Abnormal OperationDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 19)
36ClassificationDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 6)
37Clearance, Creepage Distances and Solid InsulationDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3)
38HeatingDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 11)
39Internal WiringDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10)
40Leakage Current and Electric StrengthDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 16)
41Leakage Current and Electric Strength at Operating TemperatureDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 13)
42Marking and InstructionsDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 7)
43Moisture ResistanceDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 15)
44Power Input and CurrentDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 10)
45Protection Against Access to Live PartsDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 8)
46Provision for EarthingDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 27)
47Resistance to RustingDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 31)
48Screws and ConnectionsDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 28)
49Stability and Mechanical HazardsDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 20)
50Terminals for External ConductorsDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 26)
51Verification of ComponentDomestic Electric Food-Mixers, Liquidizes and GrindersIS 302 (Part 2 / Section 14, Clause 24)
52Abnormal OperationElectric IronsIS 302 (Part 2 / Section 3, Clause 19) / IEC 60335-2-3
53ClassificationElectric IronsIS 302 (Part 2 / Section 3, Clause 6) / IEC 60335-2-3
54Clearances, Creepage Distances and Solid InsulationElectric IronsIS 302 (Part 2 / Section 3, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3) / IEC 60335-2-3
55Internal WiringElectric IronsIS 302 (Part 2 / Section 3, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10) / IEC 60335-2-3
56Leakage Current and Electric StrengthElectric IronsIS 302 (Part 2 / Section 3, Clause 16) / IEC 60335-2-3
57Leakage Current and Electric Strength at Operating TemperatureElectric IronsIS 302 (Part 2 / Section 3, Clause 13) / IEC 60335-2-3
58Marking and InstructionsElectric IronsIS 302 (Part 2 / Section 3, Clause 7) / IEC 60335-2-3
59Moisture ResistanceElectric IronsIS 302 (Part 2 / Section 3, Clause 15) / IEC 60335-2-3
60Power Input and CurrentElectric IronsIS 302 (Part 2 / Section 3, Clause 10) / IEC 60335-2-3
61Protection Against Access to Live PartsElectric IronsIS 302 (Part 2 / Section 3, Clause 8) / IEC 60335-2-3
62Provision for EarthingElectric IronsIS 302 (Part 2 / Section 3, Clause 27) / IEC 60335-2-3
63Resistance to RustingElectric IronsIS 302 (Part 2 / Section 3, Clause 31) / IEC 60335-2-3
64Screws and ConnectionsElectric IronsIS 302 (Part 2 / Section 3, Clause 28) / IEC 60335-2-3
65Stability and Mechanical HazardsElectric IronsIS 302 (Part 2 / Section 3, Clause 20) / IEC 60335-2-3
66Terminals for External ConductorsElectric IronsIS 302 (Part 2 / Section 3, Clause 26) / IEC 60335-2-3
67Verification of ComponentElectric IronsIS 302 (Part 2 / Section 3, Clause 24) / IEC 60335-2-3
68Abnormal OperationHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 19) / IEC 60335-1
69ClassificationHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 6) / IEC 60335-1
70Clearances, Creepage Distances and Solid InsulationHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3) / IEC 60335-1
71HeatingHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 11) / IEC 60335-1
72Internal WiringHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10) / IEC 60335-1
73Leakage Current and Electric StrengthHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 16) / IEC 60335-1
74Leakage Current and Electric Strength at Operating TemperatureHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 13) / IEC 60335-1
75Markings and InstructionsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 7) / IEC 60335-1
76Moisture ResistanceHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 15) / IEC 60335-1
77Power Input and CurrentHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 10) / IEC 60335-1
78Protection Against Access to Live PartsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 8) / IEC 60335-1
79Provision For EarthingHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 27) / IEC 60335-1
80Resistance To RustingHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 31) / IEC 60335-1
81Screws and ConnectionsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 28) / IEC 60335-1
82Stability and Mechanical HazardsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 20) / IEC 60335-1
83Terminals for External ConductorsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 26) / IEC 60335-1
84Verification of ComponentsHousehold and Similar Electrical AppliancesIS 302 (Part 1, Clause 24) / IEC 60335-1
85Abnormal OperationInduction StoveIS 302 (Part 2 / Section 6, Clause 19)
86ClassificationInduction StoveIS 302 (Part 2 / Section 6, Clause 6)
87Clearance, Creepage Distances and Solid InsulationInduction StoveIS 302 (Part 2 / Section 6, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3)
88HeatingInduction StoveIS 302 (Part 2 / Section 6, Clause 11)
89Internal WiringInduction StoveIS 302 (Part 2 / Section 6, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10)
90Leakage Current and Electric StrengthInduction StoveIS 302 (Part 2 / Section 6, Clause 16)
91Leakage Current and Electric Strength at Operating TemperatureInduction StoveIS 302 (Part 2 / Section 6, Clause 13)
92Marking and InstructionsInduction StoveIS 302 (Part 2 / Section 6, Clause 7)
93Moisture ResistanceInduction StoveIS 302 (Part 2 / Section 6, Clause 15)
94Power Input and CurrentInduction StoveIS 302 (Part 2 / Section 6, Clause 10)
95Protection Against Access to Live PartsInduction StoveIS 302 (Part 2 / Section 6, Clause 8)
96Provision for EarthingInduction StoveIS 302 (Part 2 / Section 6, Clause 27)
97Resistance to RustingInduction StoveIS 302 (Part 2 / Section 6, Clause 31)
98Screws and ConnectionsInduction StoveIS 302 (Part 2 / Section 6, Clause 28)
99Stability and Mechanical HazardsInduction StoveIS 302 (Part 2 / Section 6, Clause 20)
100Terminals for External ConductorsInduction StoveIS 302 (Part 2 / Section 6, Clause 26)
101Verification of ComponentInduction StoveIS 302 (Part 2 / Section 6, Clause 24)
102Abnormal OperationRoom HeatersIS 302 (Part 2 / Section 30, Clause 19) + Amd. 1 + Amd. 2 + Amd. 3
103ClassificationRoom HeatersIS 302 (Part 2 / Section 30, Clause 6) + Amd. 1 + Amd. 2 + Amd. 3
104Clearance, Creepage Distances and Solid InsulationRoom HeatersIS 302 (Part 2 / Section 30, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3) + Amd. 1 + Amd. 2 + Amd. 3
105HeatingRoom HeatersIS 302 (Part 2 / Section 30, Clause 11) + Amd. 1 + Amd. 2 + Amd. 3
106Internal WiringRoom HeatersIS 302 (Part 2 / Section 30, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10) + Amd. 1 + Amd. 2 + Amd. 3
107Leakage Current and Electric StrengthRoom HeatersIS 302 (Part 2 / Section 30, Clause 16) + Amd. 1 + Amd. 2 + Amd. 3
108Leakage Current and Electric Strength at Operating TemperatureRoom HeatersIS 302 (Part 2 / Section 30, Clause 13) + Amd. 1 + Amd. 2 + Amd. 3
109Marking and InstructionsRoom HeatersIS 302 (Part 2 / Section 30, Clause 7) + Amd. 1 + Amd. 2 + Amd. 3
110Moisture ResistanceRoom HeatersIS 302 (Part 2 / Section 30, Clause 15) + Amd. 1 + Amd. 2 + Amd. 3
111Power Input and CurrentRoom HeatersIS 302 (Part 2 / Section 30, Clause 10) + Amd. 1 + Amd. 2 + Amd. 3
112Provision for EarthingRoom HeatersIS 302 (Part 2 / Section 30, Clause 27) + Amd. 1 + Amd. 2 + Amd. 3
113Resistance to RustingRoom HeatersIS 302 (Part 2 / Section 30, Clause 31) + Amd. 1 + Amd. 2 + Amd. 3
114Screws and ConnectionsRoom HeatersIS 302 (Part 2 / Section 30, Clause 28) + Amd. 1 + Amd. 2 + Amd. 3
115Stability and Mechanical HazardsRoom HeatersIS 302 (Part 2 / Section 30, Clause 20) + Amd. 1 + Amd. 2 + Amd. 3
116Terminals for External ConductorsRoom HeatersIS 302 (Part 2 / Section 30, Clause 26) + Amd. 1 + Amd. 2 + Amd. 3
117Verification of ComponentRoom HeatersIS 302 (Part 2 / Section 30, Clause 24) + Amd. 1 + Amd. 2 + Amd. 3
118Abnormal OperationToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 19)
119ClassificationToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 6)
120Clearance, Creepage Distances and Solid InsulationToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 29.1, 29.2.1, 29.2.2, 29.2.3, 29.2.4, 29.3)
121HeatingToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 11)
122Internal WiringToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 23.1, 23.2, 23.4, 23.5, 23.6, 23.7, 23.8, 23.9, 23.10)
123Leakage Current and Electric StrengthToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 16)
124Leakage Current and Electric Strength at Operating TemperatureToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 13)
125Marking and InstructionsToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 7)
126Moisture ResistanceToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 15)
127Power and Input CurrentToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 10)
128Protection Against Access to Live PartsToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 8)
129Provision for EarthingToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 27)
130Resistance to RustingToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 31)
131Screws and ConnectionsToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 28)
132Stability and Mechanical HazardsToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 20)
133Terminals for External ConductorsToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 26)
134Verification of ComponentToasters, Grills, Roasters and Similar AppliancesIS 302 (Part 2 / Section 9, Clause 24)
135Ball Pressure TestElectrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60695 (Part 10 / Section 2)
136Change in TemperatureElectrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60068 (Part 2 / Section 14)
137Composite Temperature/Humidity Cyclic TestElectrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60068 (Part 2 / Section 38)
138Corrosion (Salt/Salt Fog)Electrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 9)
139Corrosion-SaltElectrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 9)
140Damp HeatElectrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 10)
141Damp Heat (Cyclic) TestElectrical & Electronic Product, Electronic & Electrical EquipmentIS 9000 (Part V / Section 1 to 2)
142Damp Heat (Steady State)Electrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 5)
143Damp Heat CyclicElectrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60068 (Part 2 / Section 30)
144Damp Heat, Steady StateElectrical & Electronic Product, Electronic & Electrical EquipmentIS 9000 (Part 4) / IEC 60068-2-78
145Dry HeatElectrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60068-2-2
146Dry Heat TestElectrical & Electronic Product, Electronic & Electrical EquipmentIS 9000 (Part 3 / Section 1 to 5)
147High TemperatureElectrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 17)
148High Temperature (Dry Heat) CycleElectrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 2)
149High Temperature Test (Dry Heat Cycle)Electrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD- 810H (Method 501.7)
150HumidityElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 507.6)
151Low TemperatureElectrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 20)
152Low Temperature (Cold) CycleElectrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 1)
153Low Temperature TestElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 502.7)
154Rapid Temperature Cyclic TestElectrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 4)
155Rapid Temperature Cycling (Thermal Shock)Electrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 22)
156Salt Fog / Corrosive EnvironmentsElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 509.7)
157Shock or Impact TestElectrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 24)
158Shock TestElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 516.8)
159Temperature ShockElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 503.7)
160Tropical ExposureElectrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 27)
161Tropical Exposure (Damp Heat Cyclic)Electrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 3)
162Vibration (Sine, Random Resonance)Electrical & Electronic Product, Electronic & Electrical EquipmentJSS 55555 (Test No. 28)
163Vibration (Sinusoidal)Electrical & Electronic Product, Electronic & Electrical EquipmentIS/IEC 60068 (Part 2 / Section 6)
164Vibration TestElectrical & Electronic Product, Electronic & Electrical EquipmentMIL-STD-810H (Method 514.8)
165Vibration TestElectrical & Electronic Product, Electronic & Electrical EquipmentQM-333 (Test No. 6)
166Battery Replacement TestsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.7.3.3) / IEC 60065
167Clearances and Creepage DistancesAudio, Video and Similar Electronics ApparatusIS 616 (Clause 13.1, 13.2, 13.3.1, 13.3.2, 13.3.3, 13.4, 13.5, 13.6, 13.7, 13.8) / IEC 60065
168Constructional Requirements with regard to the Protection Against Electric ShockAudio, Video and Similar Electronics ApparatusIS 616 (Clause 8.1, 8.2, 8.3, 8.4, 8.5, 8.6, 8.7, 8.8, 8.9, 8.10, 8.11, 8.12, 8.13, 8.14, 8.15, 8.16, 8.17, 8.18, 8.19, 8.20) / IEC 60065
169DrawersAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.4) / IEC 60065
170Drop TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.1.5) / IEC 60065
171Electric Shock Hazard under Normal Operating ConditionsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 9) / IEC 60065
172Electrical Connections and Mechanical FixingsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 17) / IEC 60065
173Fault ConditionsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 11) / IEC 60065
174Fixing of Actuating ElementsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.2) / IEC 60065
175Heating Under Normal operating ConditionAudio, Video and Similar Electronics ApparatusIS 616 (Clause 7.1) / IEC 60065
176Horizontal Force TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 19.4) / IEC 60065
177Humidity TreatmentAudio, Video and Similar Electronics ApparatusIS 616 (Clause 10.3) / IEC 60065
178Impact TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.1.4) / IEC 60065
179Inspection of ComponentsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 14) / IEC 60065
180Insulation Resistance and Dielectric StrengthAudio, Video and Similar Electronics ApparatusIS 616 (Clause 10.4) / IEC 60065
181Marking & InstructionsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 5) / IEC 60065
182Stability RequirementsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 19.1) / IEC 60065
183Stress Relief TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.1.6) / IEC 60065
184TerminalsAudio, Video and Similar Electronics ApparatusIS 616 (Clause 15.1, 15.2, 15.3) / IEC 60065
185Test at 10° to the HorizontalAudio, Video and Similar Electronics ApparatusIS 616 (Clause 19.2) / IEC 60065
186Test of Edges and CornersAudio, Video and Similar Electronics ApparatusIS 616 (Clause 19.5) / IEC 60065
187Vertical Force TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 19.3) / IEC 60065
188Vibration TestAudio, Video and Similar Electronics ApparatusIS 616 (Clause 12.1.3) / IEC 60065
189Alternative Method for Determining Clearances for Insulation in Circuits Connected to an a.c.Audio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex X)
190Circuits Intended for Interconnection with Building WiringAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex Q)
191ClearancesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.2, 5.4.2.1, 5.4.2.2, 5.4.2.3, 5.4.2.3.2.2, 5.4.2.3.3, 5.4.2.3.4, 5.4.2.6)
192Creepage DistancesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.3, 5.4.3.1, 5.4.3.2, 5.4.3.4)
193Determination of Accessible PartsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex V)
194Disconnect DevicesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex L)
195Drop TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.4.3.3)
196Electric Strength TestAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.9)
197Electrically Caused InjuryAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5)
198Equipment Containing Coin or Button Cell BatteriesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.8)
199Equipment Design and ConstructionAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.1.3)
200Equipment Markings, Instructions and Instructional SafeguardsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex F)
201Fixing of Conductors and Conductive PartsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.6)
202Humidity ConditioningAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.8)
203Impact TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.4.3.4)
204Injury Caused by Hazardous SubstancesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 7, 7.1, 7.2, 7.4, 7.5)
205Inspection of ComponentsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex G)
206Inspection of ComponentsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.1.2)
207Inspection of Components as SafeguardsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.5)
208Inspection of Components RequirementsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.10)
209Insulation Materials and RequirementsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.1)
210Insulation of Internal Wire as Part of a Supplementary SafeguardAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.4.6)
211Limited Short-circuit TestAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex R)
212Markings and InstructionsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.1.15)
213Measurement of Creepage Distances and ClearancesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex O)
214Mechanical Strength TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex T)
215Normal Operating Condition Tests, Abnormal Operating Condition Tests and Single Fault Condition TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex B)
216Prospective Touch Voltage, Touch Current and Protective Conductor CurrentAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.7)
217Protection Against Electrical Energy SourcesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.3)
218Protective ConductorAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 5.6)
219Requirements for SafeguardsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 9.5)
220Safeguards Against Thermal Energy SourcesAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 9.4)
221Steady Force TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.4.3.2)
222Test Conditions for Equipment Intended to Amplify Audio SignalsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Annex E)
223Thermal Energy Source ClassificationsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 9.2)
224Thermoplastic Material TestsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 4.4.3.8)
225Touch Temperature LimitsAudio/Video, Information and Communication Technology EquipmentIS/IEC 62368-1 (Clause 9.3)
226Abnormal Operating and Fault ConditionsInformation Technology EquipmentIS 13252 (Part 1, Clause 5.3) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
227Clearances, Creepage Distances and Distances through InsulationInformation Technology EquipmentIS 13252 (Part 1, Clause 2.10) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
228Disconnection from the Mains SupplyInformation Technology EquipmentIS 13252 (Part 1, Clause 3.4) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.1) + A1 + A2
229Electric StrengthInformation Technology EquipmentIS 13252 (Part 1, Clause 5.2) + Amd. 1 + Amd. 2 / IEC 60950-1 Clause 5.2) + A1 + A2
230Electrical InsulationInformation Technology EquipmentIS 13252 (Part 1, Clause 2.9) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
231Inspection of ComponentsInformation Technology EquipmentIS 13252 (Part 1, Clause 1.5) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
232Interconnection of EquipmentInformation Technology EquipmentIS 13252 (Part 1, Clause 3.5) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.5) + A1 + A2
233Limited Current CircuitsInformation Technology EquipmentIS 13252 (Part 1, Clause 2.4) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
234Limited Power SourcesInformation Technology EquipmentIS 13252 (Part 1, Clause 2.5) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 2.5) + A1 + A2
235Marking and InstructionsInformation Technology EquipmentIS 13252 (Part 1, Clause 1.7) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
236Mechanical StrengthInformation Technology EquipmentIS 13252 (Part 1, Clause 4.2) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.5) + A1 + A2
237Opening in EnclosureInformation Technology EquipmentIS 13252 (Part 1, Clause 4.6) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
238Overcurrent and Earth Fault Protection in Primary CircuitsInformation Technology EquipmentIS 13252 (Part 1, Clause 2.7) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
239Power InterfaceInformation Technology EquipmentIS 13252 (Part 1, Clause 1.6) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
240Protection Against Hazardous Moving PartsInformation Technology EquipmentIS 13252 (Part 1, Clause 4.4) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.5) + A1 + A2
241Protection from Electric Shock and Energy HazardsInformation Technology EquipmentIS 13252 (Part 1, Clause 2.1) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
242Provision for Earthing & BondingInformation Technology EquipmentIS 13252 (Part 1, Clause 2.6) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 2.6) + A1 + A2
243SELV CircuitsInformation Technology EquipmentIS 13252 (Part 1, Clause 2.2) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
244StabilityInformation Technology EquipmentIS 13252 (Part 1, Clause 4.1) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.5) + A1 + A2
245Thermal RequirementsInformation Technology EquipmentIS 13252 (Part 1, Clause 4.5) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2
246Touch Current and Protective Conductor CurrentInformation Technology EquipmentIS 13252 (Part 1, Clause 5.1) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 5.1) + A1 + A2
247Wiring Terminal for Connection of External ConductorsInformation Technology EquipmentIS 13252 (Part 1, Clause 3.3) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.3) + A1 + A2
248Wiring, Connections & SupplyInformation Technology EquipmentIS 13252 (Part 1, Clause 3.1) + Amd. 1 + Amd. 2 / IEC 60950-1 (Clause 3.1) + A1 + A2
249Marking and Instruction, Inadvertent Reactivation, Disconnection of Power to Hazardous Moving Parts, Protection Against Hazardous Moving PartsInformation Technology Equipment (Household and Home/Office Document/Media Shredders)IS 13252 (Part 1, Annex EE) + Amd. 1 + Amd. 2 / IEC 60950-1 + A1 + A2

Source of record: NABL Scope of Accreditation (PDF, 25 pages).

Frequently asked questions

Is EDTC a NABL accredited laboratory?+

Yes. The Electronics Design and Testing Centre (EDTC), Noida is accredited by the National Accreditation Board for Testing and Calibration Laboratories (NABL) in accordance with ISO/IEC 17025:2017 in the field of Testing, under certificate number NABLT0826UP19145.

What is EDTC's NABL certificate number?+

EDTC's NABL certificate number is NABLT0826UP19145. The accreditation is held by India Cellular & Electronics Association, the legal entity operating the Centre.

Are EDTC's test reports recognised internationally?+

NABL is a signatory to the ILAC Mutual Recognition Arrangement (ILAC-MRA). Test reports issued under our accredited scope therefore carry recognition across the economies whose accreditation bodies are party to the arrangement, which supports acceptance in export markets.

How long is EDTC's NABL accreditation valid?+

The accreditation is valid from 20 August 2026 to 19 August 2030, subject to continued satisfactory compliance with ISO/IEC 17025:2017 and NABL's requirements.

What is covered under EDTC's NABL scope of accreditation?+

The scope covers 249 accredited tests across 4 disciplines: Electrical — Domestic Electrical Appliances (134 tests), Electronics — IT Equipment (61 tests), Electrical — Environmental Test Facility (31 tests) and Electronics — Audio Equipment (23 tests).

Which standards is EDTC accredited to test against?+

Accredited test methods include the IS 302 series for domestic electrical appliances, IS 13252 / IEC 60950-1 and IS/IEC 62368-1 for IT and AV/ICT equipment, IS 616 / IEC 60065 for audio and video apparatus, and IS/IEC 60068, IS 9000, MIL-STD-810H, JSS 55555 and QM-333 for environmental testing.

Which products can EDTC test under its accredited scope?+

Accredited product groups include appliances for heating liquids, domestic food mixers, liquidisers and grinders, induction stoves, toasters, grills and roasters, electric irons, room heaters, clocks, household and similar electrical appliances, information technology equipment, audio/video and ICT equipment, and audio, video and similar electronic apparatus — plus environmental testing of electrical and electronic products generally.

Where is EDTC's NABL accredited laboratory located?+

The accredited facility is located at Ground Floor & 2nd Floor, C-DAC, B-30, Sector-62, Industrial Area, Noida, Uttar Pradesh, India.

What does NABL accreditation actually mean?+

NABL accreditation is a formal, independent assessment that a laboratory is technically competent to perform specific tests, using validated methods, calibrated equipment and trained personnel. It applies to a defined scope — the specific tests, products and standards listed in the accreditation annexure — rather than to the laboratory in general.

Need an accredited test for your product?

Tell us what you are building and which standard you need to meet. Our engineers will confirm what falls inside our accredited scope and what we can support alongside it.

B-30, Sector-62, Industrial Area
Noida, Uttar Pradesh - 201309

avijeet.mondal@edtc.tech | info@edtc.tech
011 4934 9900

Talk to our team